Honda Exclusive
BF225, BF200, BF90, BF75, BF60, BF50, BF40
Honda’s BLAST is designed to improve acceleration at low speed.

When you move the throttle quickly, BLAST advances the ignition timing to its maximum. At the same time the air/fuel ratio becomes richer to prevent knock. Torque is greatly increased.

The result? Strong acceleration when you need it. And “hole shot” is vastly improved, as more horsepower gets the hull up on plane quicker.

Learn more about BLAST.

Honda Exclusive
BF225, BF200, BF150, BF135, BF90, BF75, BF60, BF50, BF40
This feature increases fuel efficiency by allowing combustion to operate on a leaner air-to-fuel mixture. At cruising speed, Honda engines run on up to 20% less fuel than other comparably sized outboards.

Learn more about Lean Burn Control.

Honda Exclusive
BF225, BF150, BF90
Honda’s Variable Valve Timing & Lift Electronic Control (VTEC^®) system provides power where and when you need it.  VTEC gives you a broader, flatter torque curve and smooth power delivery throughout the engine’s operating range. The result is a superior combination of power, torque and fuel efficiency.

Learn more about VTEC.

BF40, BF50, BF60, BFP60, BF200, BF225

Honda is wired for the future. Equipment designed to the NMEA 2000^® standard has the ability to share and display data, including commands and status with other compatible equipment over a single channel.

Click here to see an example of an on-board NMEA 2000^® network.

Easy Dock^™ Steering takes the anxiety out of maneuvering your pontoon into the marina. Available on the Power Thrust BFP60, Easy Dock^™ Steering has a full 50° of rudder angle to port and again to starboard.

Watch the video.

Honda Exclusive
BF225, BF200, BF150, BF135
Honda’s unique variable intake system optimizes air flow to match the engine’s speed.  The result?  Maximized combustion efficiency, increased torque, and superb fuel efficiency. 

Learn more about Dual Stage Induction for the BF135/150

Learn more about Dual Stage Induction for the BF200/225

Honda Exclusive
All engines

Honda’s patented 4-Front corrosion paint process creates a tight barrier between the engine and environment. This double sealed, multi-layered process helps to keep your engine looking and performing like new.

Sacrificial anodes protect the engine from galvanic corrosion.   

Learn more

Honda Exclusive
All engines BF75 and larger
The starter motor is inverted in a sealed chamber.  This protects the starter drive from the elements.  The result is solid dependability.

Honda Exclusive
All engines (amperage varies by model)
Honda’s high output alternators will help make sure batteries stay charged and electronic equipment keeps humming.

Learn more

Honda Exclusive

Learn more

Honda Exclusive
All engines BF75 and larger
Sometimes called the flywheel, the torsion dampener is located near the base of the powerhead.

The design lowers the center of gravity for improved handling, better hull maneuverability, and minimal vibration.

Honda Exclusive
BF225, BF200, BF150, BF135, BF90, BF75, BF60, BF50, BF40
Our oxygen sensors and knock sensors help determine the correct fuel flow and ignition curve.  This enhances overall engine operation and efficiency.

Honda Exclusive
BF90, BF75, BF60, BF50, BF40, BF30, BF25
Patented non-linear rubber mounts provide smoother operation at all speeds.

Honda Exclusive
BF90, BF75, BF60, BF50, BF40, BF30, BF25
Available on our mid-range HP engines, Honda’s ergonomically designed handles minimize driver fatigue and improve handling.

• Adjustments for throttle and steering friction allow for easier control
• Convenient up-front shifting
• Fingertip-starting
• PTT switch
• Engine alert lamps provide added safety and convenience.

Variable Trolling Control is available on the BF60 and BFP60.

BF225, BF200
The BF225 and BF200 feature a narrow, balanced 60° design. This design lacks the bulk and weight of long intake runners and multi-camshafts.

The compact 24-valve SOHC design offers top performance and durability.  It makes possible twin re-power mounts on traditional 26" centers.

BF150, BF135
A powerful, compact 24-valve DOHC design creates more valve lift to pull in more air for increased horsepower.

The low-maintenance design allows easy adjustment of the rocker arms. No multiple shims or trial-and-error adjusting needed.

BF225, BF200, BF150, BF135, BF115, BF90, BF75, BF60, BF50, BF40
Honda Multi-Port Programmed Fuel Injection (PGM-FI) delivers the precise amount of air/fuel to each cylinder under all operating speeds and conditions. The result?

• Quick starts
• Instant throttle response
• Powerful performance
• Lower fuel consumption.

Watch the video.

All engines except the BF2
The engine alert system monitors vital engine functions.  It prevents damage by alerting the driver of overheating, low oil pressure, and over-rev.

Watch the video.

BF30, BF25, BF20, BF15, BF9.9, BF8
Just like a fuel injection system, autostart enrichment automatically adjusts the air-fuel mixture for quick, easy starting and warm-up.

BFP60, BFP20, BFP15, BFP9.9, BFP8
A special Power Thrust 4-blade prop on the BFP8-BFP20 and a higher gear ratio on the BFP60 help provide these engines with extraordinary forward and reverse thrust.  The result is improved maneuverability and performance.

Watch the video.

BF60, BFP60
The optional dash-mounted Rudder Angle Indicator displays the steering angle of the outboard engine, making it easier to maneuver.

BF60, BFP60
The optional Trim Limit Switch prevents the tilting engine from hitting the underside of a pontoon boat’s rear sundeck. This option is especially helpful on pontoon boats and other craft where the engine is not directly visible.

BF225, BF200, BF150, BF135
Available on our larger HP engines, stainless steel components include the steering arm, tilt tube and all shafts to ensure durability and long-term corrosion resistance.