Gauges


Faria Gauge Sets

Features:
• Side lit dial face
• Digital hour meter

5 Gauge Set – White Face/Flat Lens

06300-ZW5-010ZB

Includes: 10-60 mph speedometer, 7K tach/hour meter, trim meter, volt meter, fuel gauge.
Requires Faria instrument harness for installation, Part No. 32103-ZW7-000AH.

Instrument Harness (Fused) 7.5Amp

32103-ZW7-000AH

Connects Faria 5 gauge set plus optional water pressure gauge to main harness. 54 inches long.

Speedometer – 10-60 MPH - White Face/Flat Lens

37200-ZW5-000ZB

Includes: Pressure tubing.

7K Tach/Hour Meter - White Face/Flat Lens

37250-ZW5-010ZB

Includes: Digital hour meter.

Analog Hour Meter - White Face/Flat Lens

39700-ZW5-000ZB

Includes: Removable black square bezel.

Trim Meter - White Face/Flat Lens

37260-ZW5-000ZB

Fuel Gauge - White Face/Flat Lens

37300-ZW5-000ZB

Volt Meter - White Face/Flat Lens

37450-ZW5-000ZB

Water Pressure Gauge– 0-30 PSI - White Face/Flat Lens

37350-ZW5-000ZB

Matches 5 gauge set dial face. Includes: Pressure tubing and fitting. Required 1/8” hose barb (BSPT), PN 19271-ZV5-000AH, is included.

5 Gauge Set – Black Face/Flat Lens

06300-ZW5-010ZA

Includes: 10-60 mph speedometer, 7K tach/hour meter, trim meter, volt meter, fuel gauge.
Features:
• Side lit dial face
• Digital hour meter Requires Faria instrument harness for installation, Part No. 32103-ZW7-000AH.

Instrument Harness (Fused) 7.5Amp

32103-ZW7-000AH

Connects Faria 5 gauge set plus optional water pressure gauge to main harness. 54 inches long.

Speedometer – 5-35 MPH - Black Face/Flat Lens

06372-ZV5-950AH

Intended for pontoon applications.

Speedometer – 10-60 MPH - Black Face/Flat Lens

37200-ZW5-000ZA

Includes: Pressure tubing.

Analog Hour Meter - Black Face/Flat Lens

39700-ZW5-000ZA

Includes: Removable black square bezel.

7K Tach/Hour Meter - Black Face/Flat Lens

37250-ZW5-010ZA

Includes: Digital hour meter.

7K Tach/Hour Meter -Black Face/Flat Lens

37250-ZV5-950AH

Note: Same as 37250-ZW5-010ZA only with no hour meter.

Trim Meter - Black Face/Flat Lens

37260-ZW5-000ZA

Volt Meter - Black Face/Flat Lens

37450-ZW5-000ZA

Water Pressure Gauge – 0-30 PSI - Black Face/Flat Lens

37350-ZW5-000ZA

Matches 5 gauge set dial face. Includes: Pressure tubing and fitting. Required 1/8” hose barb (BSPT), PN 19271-ZV5-000AH, is included.

Fuel Gauge - Black Face/Flat Lens

37300-ZW5-000ZA

Honda NMEA 2000 Gauges

The Honda NMEA 2000® tachometer and speedometer gauges display engine and vessel data received from up to five engines on the same NMEA 2000 backbone or bus. These gauges feature analog pointers for engine RPM and vessel speed as well as a two-color graphic LCD display, programmable in English or Metric units, with push-button operations for custom display set-up. The gauges are completely sealed and feature anti-fog coated lenses.

These gauges can be used as a pair or separately and connect directly to a NMEA 2000 backbone or bus. Display data includes: Engine RPM, Coolant temperature, fuel rate, fuel used, fuel level, trim, battery voltage, engine hours, and vessel speed*. * Requires NMEA 2000 GPS input to backbone.

Use of these gauges and gauge harness requires that the vessel have:
1. A properly installed and powered NMEA 2000 backbone (bus)
2. Installation of an NMEA 2000 Signal Cable from the NMEA compatible Honda Marine engine to the NMEA 2000 backbone.
• 9.8 ft. long NMEA 2000 Signal Cable, P/N 06328-ZZ3-730HE or
• 19.5 ft. long NMEA 2000 Signal Cable, P/N 06328-ZZ3-760HE
See NMEA Components for additional information and applicable model listing.

NMEA 2000® Gauge Kit
White
06326-ZX2-T11AH
Black
06326-ZX2-U01AH

Includes Tachometer (7000 rpm), drop cable harness and T connector to connect to NMEA 2000 backbone.

NMEA 2000® Gauge Kit
White
06375-ZX2-T71AH
Black
06375-ZX2-U71AH

Includes Tachometer (7000 rpm), Speedometer (70 mph), two drop cable harnesses and two T connectors to connect to NMEA 2000 backbone.

NMEA 2000® Speedometer
White
06373-ZX2-A71AH
Black
06373-ZX2-B71AH

Includes Speedometer (70 mph), drop cable harness and T connector to connect to NMEA 2000 backbone.

Water Pressure Gauge
White
37353-ZX2-000ZA
Black
37353-ZX2-000ZB

Matches the styling of other NMEA 2000 gauges. The kit comes with the water pressure gauge, mounting bracket, rubber hose, hardware, and installation instructions. Gauge is available in black or white.

NMEA 2000® Drop Cable Harness

06326-ZX2-000EU

This NMEA harness is used to connect the Honda NMEA compatible gauge to the vessel backbone or bus. The harness is 19.5 ft. long.

Individual Gauges

Rudder Meter Kit
White face
06373-ZZ3-000
Black face
06373-ZZ3-610

Enables the rudder indicator gauge function.

Speedometer Tubing (rubber hose)
25 feet long
37202-ZW5-025AH
100 feet long
37202-ZW5-100AH

Connects any speedometer to the pitot tube on the engine gearcase, transom mounted pitot tube or pitot tube connection at the front grommet. Heavy wall construction.

Inductive Tachometer/ Hour Meter
BF2-20
08181-ENM-036AH

Does not work on BF115-250.

Digital L.C.D. Hour Meter

39700-ZV5-800AH

Resettable. Note: Does not work with BF25- 50A4 tiller handle models.

Instrument Housing/ Panel
BF25-BF50
31420-ZW7-000AH

Allows mounting the standard Honda original equipment tachometer, key switch, trim meter and instrument light switch.
Note: Requires standard wire harness A for connection. Intended for LHTA models.

Faria Universal Tachometer
BF8D-BF250
37250-ZV5-950AH

Black face, flat lens tach. Tachometer only - no hour meter.

Tach/Trim Meter Kit

06300-ZW5-000KT

Kit includes Faria tach/hour meter, trim meter and Faria connecting instrument harness. Only available in black face, flat lens.

1/8 Inch Hose Barb–BSPT
BF135A, BF150A, BF200A, BF225A, BF250A
19271-ZV5-000AH

This brass fitting screws into the port (remove plug first) on the powerhead for water pressure source. This is a British Pipe Thread which conforms to the factory thread on the designated engines. Always use 2 wire ties to secure tubing to this fitting.

Low Water Intake Screens
BF200A/225A Prior to K1
41104-ZY3-000AH

Low water Intake Screen set used on standard and Sabre™ gear cases. Uses original equipment mounting hardware. Allows the outboard to be run at a higher position while minimizing the top of the exposed screen from drawing air into the cooling system.

Low Water Intake Screens
BF135A, BF150A
41104-ZY6-150AH

Uses original equipment mounting hardware. Allows the outboard to be run at a higher position without drawing air into the cooling system through the top of the exposed screen.

Tachometer Bezel Kit

06380-ZV5-000AH

May be needed to install the smaller diameter original equipment tachometer in the standard 3 3⁄8 inch hole. Kit contains two black anodized aluminum bezel rings, needed for front and rear of mounting panel.

Harness ‘‘A’’ (Fused)—4 Wire Connection, Original Equipment— Pre 2003

32540-ZV5-911

Connects original equipment tachometer, trim meter, and harness ‘‘B’’ tomain harness or side mount control box. 54 inches long.

Harness ‘‘B’’ - Original Equipment

32550-ZV5-910

Provides additional connection to harness ‘‘A’’ for speedometer, hour meter and volt meter.

0 to 30 PSI Water Pressure Gauge

37353-ZY3-000AH

Matches the face plate of the Honda digital speedometer and digital tachometer. Includes pressure tubing and engine fitting. Requires additional 1/8” hose barb (BSPT), PN 19271-ZV5-000AH.

6 Wire Extension Harness
BF40D~BF250A
32570-ZY3-010AH

10 foot long extension harness connects the 6 pin connector on the 20 or 23 wire engine main harness at the helm to the digital gauge harness. Allows digital gauges to be mounted in a remote location.

Digital Gauge Harness

06326-ZY3-802AH

Connects to 7-wire key switch panel harness. Supports both digital tach and speed as well as analog gauges.
Both analog and digital gauges can be used separately or in combination with each other. This harness will allow digital gauges to show analog functions on non-digital engines (same as standard 5 gauge set as well as PGMFI indicator lights). Standard analog gauge harness plugs into separate 4-wire pigtail provided.

VeeThree Gauge Sets

Features:
• Fog free lens coating
• Back lit dial face
• Digital hour meter
• Engine on Demand Technology only logs hours on hour meter when engine is running

5 Gauge Set–White Face/Domed Lens

06303-ZW5-010ZB

Includes: 10-65 mph speedometer, 7K tach/hour meter, trim meter, volt meter, fuel gauge.
Requires Teleflex instrument harness for installation, Part No. 32200-ZW7-000AH.

Instrument Harness (Fused) 7.5Amp

32200-ZW7-000AH

Connects Teleflex 5 gauge set plus optional water pressure gauge to main harness. 54 inches long.

Speedometer – 5-35 MPH White Face/Domed Lens

37213-ZW5-000ZB

Intended for pontoon applications. Includes: Pressure tubing.

Speedometer–10-65 MPH - White Face/Domed Lens

37203-ZW5-000ZB

Includes: Pressure tubing.

Speedometer – 0-80 MPH - White Face/Domed Lens

37203-ZW5-080ZB

Includes: Pressure tubing.

7K Tach/Hour Meter - White Face/Domed Lens

37253-ZW5-010ZB

Includes: Digital hour meter.

Volt Meter - White Face/Domed Lens

37453-ZW5-000ZB

Trim Meter - White Face/Domed Lens

37263-ZW5-000ZB

Water Pressure Gauge– 0-40 PSI - White Face/Domed Lens

37353-ZW5-000ZB

Matches 5 gauge set dial face. Includes: Pressure tubing and fitting. Required 1/8” hose barb (BSPT), PN 19271-ZV5-000AH, is included.

Fuel Gauge - White Face/Domed Lens

37303-ZW5-000ZB

5 Gauge Set–Black Face/Domed Lens

06303-ZW5-010ZA

Includes: 10-65 mph speedometer, 7K tach/hour meter, trim meter, volt meter, fuel gauge. Requires Teleflex instrument harness for installation, Part No. 32200-ZW7-000AH.

Instrument Harness (Fused) 7.5Amp

32200-ZW7-000AH

Connects Teleflex 5 gauge set plus optional water pressure gauge to main harness. 54 inches long.

Speedometer – 5-35 MPH - Black Face/Domed Lens

37213-ZW5-000ZA

Intended for pontoon applications. Includes: Pressure tubing.

Speedometer – 10-65 MPH - Black Face/Domed Lens

37203-ZW5-000ZA

Includes: Pressure tubing.

Speedometer – 0-80 MPH - Black Face/Domed Lens

37203-ZW5-080ZA

Includes: Pressure tubing.

7K Tach/Hour Meter -Black Face/Domed Lens

37253-ZW5-010ZA

Includes: Digital hour meter.

Volt Meter - Black Face/Domed Lens

37453-ZW5-000ZA

Trim Meter - Black Face/Domed Lens

37263-ZW5-000ZA

Water Pressure Gauge– 0-30 PSI - Black Face/Domed Lens

37353-ZW5-000ZA

Matches 5 gauge set dial face. Includes: Pressure tubing and fitting. Required 1/8” hose barb (BSPT), PN 19271-ZV5-000AH, is included.

Fuel Gauge - Black Face/Domed Lens

37303-ZW5-000ZA